Clutch chip manufacturers to teach you how to exclude it in the course of the operation of some of the problems, so that we can more easily understand some of his driving principle, to facilitate the late when he was to operate and use.

      It will be a lot of reasons for failure, for example, when the engine is running, the speed is not fast, and although the clutch pedal has been taken to the bottom, but it is difficult to hang up the block, these are some of his failure The At this time we clutch the chip manufacturers need to remove the floor, and then hang the gear into the neutral, and then the clutch step in the end, if you can easily carry the wave, then it is a good separation, if the dial is not Move it, it shows that the separation is not complete, when we find out some of his reasons after the failure, you need to rule out what factors in the end? If it is because the overall clutch pedal free travel is too large, it needs to be adjusted, if it is because the height of the separation lever is inconsistent, resulting in these problems, but also need to adjust.

      Its use is able to achieve a very good effect, for our clutch chip manufacturers car driving is a very big impact, so we must find a way to its troubleshooting, to ensure that it has been in a very good state Down to use.