In the car which clutch driven plate in the long-term car driving process which will be prone to failure, but why this failure, how should the failure to be excluded.Today we invited the manufacturer and everyone in detail introduce.
Car as our modern main means of transport, in the course of a long period of use, some of its mechanical parts will certainly be more or less there will be a little failure, why lose the fault, how should we remove these failures To solve this step, we need to master some of the methods, we want, you can also observe the phenomenon, such as the engine idling operation, the clutch pedal has been stepped on the end, and then linked gearshift gear box crash, when we forced hanging After the block, the clutch pedal has not yet been released, the car has already started the driving state or flameout state, then we must check the clutch bottom cover, the transmission into the neutral, the clutch step in the end, and then move Driven plate, if you can easily turn, that a good separation, if the dial does not move on the clutch is not complete separation.

When there is such a separation is not complete, it is certainly the clutch drive plate or hard disk between any problems, we can check.First check the clutch pedal free travel is too large, if the country to be adjusted, but also To check whether the height of the separation lever is too low, too high height will affect its normal play, and we should promptly check the maintenance of the various parts of the work should be carried out, because any of the wear and tear will affect its failure, So we in the regular process of running the car which should be carried out on a regular basis to prevent the failure to appear.